Using Nokia N70 to connect to internet with Ubuntu 8.04

by

Recently I bought a Nokia N70 Music Edition. It was mainly for internet on the go; to check mail, browse the net, receive and make VOIP calls. Just to see whether it would work, I tried to connect to internet via 3G using the N70. To much to my delight I was successfully connected to internet without any issues using the GNOME network applet/admin. I have a Dialog Broadband connection, and download speeds were in the range of 25KB/s-40KB/s, pretty good on WCDMA 2100. Best part of all was that I didn’t have to touch the command line. So all not so technically inclined folks can make it work as well without glitches.

Bellow you will find the steps. Please make sure you can browse the net with the phone to make sure you are in a service area ;).

Step 1

Connect the phone to the PC. I used USB but Bluetooth is reported to be working on Ubuntu 8.04 as well.

Step 2

Start the network admin application (System -> Administration -> Network), you’ll have to unlock it if you are not root (most likely you are not).

Step 3

Select “Point to point connection” and open up the properties.

Step 4

In the General tab make the following changes. Check/select “Enable this connection”. Select GPRS/UMTS as the Connection type. Set the Access point name to what’s provided by your service provider (In my case it was www.dialogsl.com). Under account data put your username and password provided by your service provider if any.

Step 5

In the modem tab select/type in the correct modem port, in my case it was /dev/ttyACM0. If it doesn’t work for you, plug the phone usb cable while monitoring /var/log/messages, you can see where the phone is being mounted.

Step 6

Save the settings by pressing Ok, then activate the connection by checking the check box against “Point to point connection”.

That’s it, now you should be connected to the internet via 3G if there is coverage in your area or else via GPRS. Hope you will find this post helpful.

SVN Commit messages from the author

by

I was given the task of altering a SVN commit message hook(mailer.py) to send the messages as the author. The box was running Debian Etch, looking at the mailer.conf file I couldn’t figure out how to do that. There was no documentation that I could find.

Finally after much head scratching and searching I figured out that %(author)s situation variable can be used in from_addr. It was confirmed by http://svn.collab.net/repos/svn/trunk/tools/hook-scripts/mailer/mailer.conf.example.

Hope this will come in handy for someone trying to do the same.

Ping Bloglines – Poll-n-Ping! exclusive

by

Bloglines is the latest service to be added to the list of services Poll-n-Ping! can ping. None of the multiple ping services that are out there has the ability to ping Bloglines. This brings the total number of services Poll-n-Ping! support to 20.

Some multiple blog ping services (e.g. Pingoat)  have ping servers that are no longer existant. We at Poll-n-Ping! continuousy monitor the upstream ping services to ensure that they are live. We are also believe in being transparent, hence provide you will the result of each ping we make.

We are constantly trying to increase the number of services we ping. Do not forget to check your Poll-n-Ping! account regularly for the latest additions. If you do not already have a Poll-n-Ping!, you are not exploiting the maximum potential of your blog. Grab your self a free Poll-n-Ping! account without further dalay.

Ping more search engines than with Ping-o-Matic

by

Now you can ping more blog search engines at once than it was possible with Ping-o-Matic. Poll-n-Ping! added 3 more services today, bringing the number of services that will be pinged to 18 whil Ping-o-Matic only supports 16 services.

Poll-n-Ping! is the latest pinging service. Poll-n-Ping! is morethan just a pinging service, it monitors (polls) your blog for changes. Also provides notification, should you blog go down for some reason. All this comes for free, the best price ever.

Go grab your Poll-n-Ping! account now, you can forget about pinging and concentrate on blogging. Poll-n-Ping will take care of pinging blog search services.

Poll-n-Ping!, automagically ping 15+ services

by

Poll-n-Ping! added 8 more services today to the list of services that will be automatically pinged, bringing the number to 15. Register for a Poll-n-Ping! account, and put your blog details today and never bother about manually pinging when there are new posts in your blog; Poll-n-Ping! will take care of it all.

The number of services that Poll-n-Ping! supports will increase further in the near future. Don’t forget to create a Poll-n-Ping! account.

Recipe for compressed script.aculo.us

by

I was searching for a compressed version of script.aculo.us javascript library in one file. The search turned out almost fruitless; I found outdated script.aculo.us versions compressed. It was obvious to me that I was on my own. I also wanted to post the method to do it instead of the result.

YUI compressor was the best tool I could use to compress any javascript. YUI combined with gzip compression for compatible browsers would produce the smallest on the wire javascript files (See http://www.julienlecomte.net/blog/2007/08/13/).

First attempt to put all the script.aculo.us files into one file failed with mismatched dependencies. I had to find out the correct order to concat the files. As I found out the order should be scriptaculous.js, builder.js, effects.js, controls.js, dragdrop.js, slider.js, sound.js (I have specifically left out unittest.js). If you want you can throw in Prototype into the mix at the begining as it is required by script.aculo.us (I did that).

Run the following command in a shell prompt from the script.aculo.us root. to concat prototype and script.aculo.us.

 $ cat lib/prototype.js src/scriptaculous.js src/builder.js src/effects.js src/controls.js src/dragdrop.js src/slider.js src/sound.js > scriptaculous.bundle.js

You need to download YUI compressor, run the following command. 

 $ java -jar /path/to/yui/compressor/build/yuicompressor.jar scriptaculous.bundle.js -o scriptaculous.bundle.min.js

In my case I use YUI compressor version 2.3.5 and script.aculo.us 1.8.1, and the file sizes were 244KB scriptaculous.bundle.js and 146KB scriptaculous.bundle.min.js. That’s a 40% compression.

You need to configure your web server to serve javascript files gzipped for user agents that are accepting gzipped content. You have to do your own reasearch for that :). After gzip compression was turned on for javascript files the size of scriptaculous.bundle.min.js on the wire is 41K, that’s a 83% compression, wow that’s alot of saving on bandwidth and loading time.

You can download the compressed and bundled script.aculo.us scriptaculous.bundle.min.js. Hope someone will finds it useful.

Poll-n-Ping, coz u r busy blogging

by

I would like to introduce a brand new service. It is a automated blog search directory pinging service named Poll-n-Ping. It is different from Ping-o-matic and similar services, because Poll-n-Ping monitors the blog (actually the feed) for changes and when it detects changes it will automatically ping the blog search directories.

You can checkout the service at http://www.mohanjith.net/pnp. All this comes free of charge, but donations are always welcome. Right now there is no limit on the number of blogs that can be monitored by a single user. If you want your blog to be submitted to all the blog search directories that we add support from time to time, you will have to visit Poll-n-Ping regularly.

Soon I plan to add alert service Poll-n-Ping, the subscribed users can receive notification mails or IM when content changes, blog goes offline, and/or blog comes online. However this will be a paid service unless I receive enough donations to support the hosting.

Poll-n-Ping has Turbogears under the hood :-).

Hope you will find the Poll-n-Ping service useful.

Hacking drupal: Add search by node creation date and the author

by

Some of the users using one of my Drupal sites were asking for search by author and creation date. The site had 3000+ nodes and the user’s request seemed reasonable enough. I first started with googling for a Drupal module or a patch that would add the functionality, but none were found.

So when ahead and hacked the node module. I sucessfully managed to add search by author and node creation date to advanced search block. If you are in searching for a patch like I did you can find it at http://drupal.org/node/233476, I’m keeping my fingers crossed to see whether it would make it to the Drupal trunk :).